204-030-893-001 (Pin Straight Headed) by Bell Helicopter - Request a Quote Now

Part No. : 204-030-893-001 Alternate P/N : 204030893001 Manufacturer : Bell Helicopter
CAGE Code : 97499 Item Name : Pin Straight Headed FSC : 5315 Nails Machine Keys and Pins
NSN : 5315-00-707-7641

You can send a request for quote for p/n 204-030-893-001 to ASAP Semiconductor using justpartsunlimited.com. This part is manufactured by Bell Helicopter (CAGE Code 97499). The description of it is Pin Straight Headed. The national stock number associated with this part is NSN 5315007077641. This part belongs to FSC Nails Machine Keys and Pins part family. An associate from ASAP Semiconductor will respond within 15 minutes to your query. It is our pleasure to help you with 204-030-893-001 part requirements.

Required fields compulsory *

Contact Information

Note: We will not share your information to any third parties.

  * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

NSN Information for Part Number 204-030-893-001 with NSN 5315-00-707-7641, 5315007077641

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5315-00-707-7641

Item Description:

Pin Straight Headed

53150070776410N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
204-030-893-001223

Characteristics Data of NSN 5315-00-707-7641, 5315007077641

MRCCriteriaCharacteristic
AASKHEAD STYLEPAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
AAZPCHAMFER LENGTH0.037 INCHES MINIMUM AND 0.057 INCHES MAXIMUM
ABMZDIAMETER0.122 INCHES MINIMUM AND 0.124 INCHES MAXIMUM
ABPBUNDER HEAD LENGTH0.180 INCHES NOMINAL
ABRBHOLE ARRANGEMENT STYLEONE END DRILLED
ABRCFIRST HOLE DIAMETER0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM
ABREDISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.090 INCHES NOMINAL
CQPJPIN CHAMFER ANGLE14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
CRRGPIN HEAD DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HGTHHEIGHT0.037 INCHES MINIMUM AND 0.057 INCHES MAXIMUM
MATTMATERIALSTEEL COMP 4130 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 COND D-4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLSTYLE DESIGNATORSTRAIGHT
ASAP Semiconductor's Certifications and Memberships