RV1-10-C-O-18 Part by Eaton Corporation with NSN 4820-01-492-2517 - Request a Quote Now

Part Number: RV1-10-C-O-18

Manufacturer: eaton corporation

NSN: 4820-01-492-2517

CAGE Code: 9G527

NIIN: 014922517

Item Name : valve calibrated flow

INC Code: 33212

Country: USA

NCB Code: 01

FSG: 48 Valves

FSC: 4820 Valves Nonpowered

For competitive procurement options on part number RV1-10-C-O-18 from Eaton Corporation (CAGE Code 9G527), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number RV1-10-C-O-18 Details:

Part number RV1-10-C-O-18 is manufactured by Eaton Corporation and listed with the item name Valve Calibrated Flow. Classified under NSN 4820-01-492-2517, the NIIN of this item is 014922517, its INC is 33212, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 48 Valves and Class (FSC) 4820 Valves Nonpowered. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RV1-10-C-O-18

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part RV1-10-C-O-18 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number RV1-10-C-O-18 with NSN 4820-01-492-2517, 4820014922517

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4820-01-492-2517 Item PartTypeName: VALVE,CALIBRATED FLOW	4820	014922517		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
RV1-10-C-O-18	5	2	3

Characteristics Data of NSN 4820-01-492-2517, 4820014922517

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	ALUMINUM
AAQL	BODY STYLE	SCREW-IN CARTRIDGE
ABFF	FURNISHED ITEMS	AUTOMATIC RELIEF VALVE
ACKL	MEDIA FOR WHICH DESIGNED	HYDRAULIC FLUID, MIL-H-5606
ACSH	SEAT MATERIAL	RUBBER, BUNA-N
ADQU	FLOW CONTROL DEVICE	PISTON, BOTTOM GUIDED
ADQZ	END CONNECTION QUANTITY	2
ADSY	VALVE DISCHARGE FLOW RATE	8.0 GALLONS PER MINUTE
AEVN	REGULATION TYPE	MANUAL SINGLE STAGE
AZKQ	III TEMP RATING	120.0 DEG CELSIUS MAXIMUM
FEAT	SPECIAL FEATURES	DIRECT ACTING, SPOOL TYPE, INTERNALLY PILOTED, EXTERNALLY DRAINED, SCREW IN CARTRIDGE PRESSURE SEQUENCE VALVE; 2400 TO 3000 PSI; CRACKING PRESSURE 100 TO 600 PSI; CAP ADJUSTMENT; 10 SIZE