Request a quote for Part Number 11F013 by General Electric Co

Part No. : 11F013 Manufacturer : general electric co CAGE Code : 30221
Item Name : Resistor Variable Wire Wound Non FSC : 5905 Resistors NSN : 5905-00-158-5716

You can send a request for quote for p/n 11F013 to ASAP Semiconductor using justpartsunlimited.com. This part is manufactured by General Electric Co. The description of it is Resistor Variable Wire Wound Non. The national stock number associated with this part is 5905001585716. This part belongs to Resistors part family. An associate from ASAP Semiconductor will respond within 15 minutes to your query. It is our pleasure to help you with your part requirements.


Required fields compulsory *

Contact Information

Note: We will not share your information to any third parties.

  * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

NSN Information for Part Number 11F013 with NSN 5905-00-158-5716, 5905001585716

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-158-5716

Item Description:

Resistor Variable Wire Wound Non

59050015857160NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
11f01351CA

Characteristics Data of NSN 5905-00-158-5716, 5905001585716

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPIII OVERALL LENGTH2.332 INCHES MAXIMUM
ABNBFIRST FLAT LENGTH0.344 INCHES NOMINAL
ABNCFLAT HEIGHT0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM
ABPMBODY DIAMETER1.680 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
ABXFSHAFT LENGTH0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM
ADAQBODY LENGTH1.410 INCHES MAXIMUM
ADAVIII OVERALL DIAMETER2.260 INCHES MAXIMUM
AEDXSHAFT STYLEROUND, FLATTED
AEDZSHAFT BEARING TYPESLEEVE
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE40.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE240.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 12 OCLOCK
AEFPNONTURN DEVICE RADIUS0.510 INCHES NOMINAL
AFJNIII FRAGILITY FACTORMODERATELY RUGGED
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCCELECTRICAL RESISTANCE PER SECTION200.0 OHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG275.0 MINIMUM AND 305.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER340.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS25.0 HEAT SINK SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
TESTTEST DATA DOCUMENT81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING
TTQYTERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-22/3 GOVERNMENT SPECIFICATION
ASAP Semiconductor's Certifications and Memberships