CR2 1 2-XBE Part by Accurate Bushing Company with NSN 3110-01-131-2311 - Request a Quote Now

Part Number: CR2 1 2-XBE

Manufacturer: accurate bushing company

NSN: 3110-01-131-2311

CAGE Code: 07484

NIIN: 011312311

Item Name : cam follower needle bearing

INC Code: 00040

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number CR2 1 2-XBE from Accurate Bushing Company (CAGE Code 07484), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CR2 1 2-XBE Details:

Part number CR2 1 2-XBE is manufactured by Accurate Bushing Company and listed with the item name Cam Follower Needle Bearing. Classified under NSN 3110-01-131-2311, the NIIN of this item is 011312311, its INC is 00040, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CR2 1 2-XBE

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CR2 1 2-XBE with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number CR2 1 2-XBE with NSN 3110-01-131-2311, 3110011312311

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-131-2311 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING	3110	011312311	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4843589-5	5	2	5

Characteristics Data of NSN 3110-01-131-2311, 3110011312311

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	1.1250 INCHES NOMINAL
ABHP	OVERALL LENGTH	3.7812 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	2.5000 INCHES NOMINAL
AGRJ	STUD DIAMETER	1.0000 INCHES NOMINAL
AGVT	OUTER RING WIDTH	1.5000 INCHES NOMINAL
AGXF	STUD LENGTH	2.2500 INCHES NOMINAL
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
CMLP	THREAD QUANTITY PER INCH	14
CQJX	NOMINAL THREAD SIZE	1.000 INCHES
FEAT	SPECIAL FEATURES	FURN. W/ ECCENTRIC STUD BUSHING 1.1250 IN. NOM W AND 1.3750 IN. NOM OD; STUD DRILLED AND TAPPED FOR RELUBRICATION; HEX HOLE IN FACE OF STUD
MATT	MATERIAL	STEEL END PLATE
MATT	MATERIAL	STEEL INSERT
MATT	MATERIAL	STEEL OUTER RING
MATT	MATERIAL	STEEL ROLLER
MATT	MATERIAL	WOOL SEAL
SFTT	SURFACE TREATMENT	OXIDE ALL EXTERNAL/EXPOSED METAL SURFACES
STYL	STYLE DESIGNATOR	CAM FOLLOWER
THSD	THREAD SERIES DESIGNATOR	UNF