AN206DSP3 Part by Aeronautical Standards Group with NSN 3110-00-042-1012 - Request a Quote Now

Part Number: AN206DSP3

Manufacturer: aeronautical standards group

NSN: 3110-00-042-1012

CAGE Code: 88044

NIIN: 000421012

Item Name : bearing ball airframe

INC Code: 00041

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number AN206DSP3 from Aeronautical Standards Group (CAGE Code 88044), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AN206DSP3 Details:

Part number AN206DSP3 is manufactured by Aeronautical Standards Group and listed with the item name Bearing Ball Airframe. Classified under NSN 3110-00-042-1012, the NIIN of this item is 000421012, its INC is 00041, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN206DSP3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AN206DSP3 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number AN206DSP3 with NSN 3110-00-042-1012, 3110000421012

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-042-1012 Item PartTypeName: BEARING,BALL,AIRFRAME	3110	000421012	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
3110PL0928032	3	9	6

Characteristics Data of NSN 3110-00-042-1012, 3110000421012

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.1900 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.7774 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.3920 INCHES NOMINAL
AGVU	INNER RING WIDTH	0.5000 INCHES NOMINAL
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AGZC	LOAD DIRECTION	RADIAL
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
CTFZ	STANDARD TOLERANCE DESIGNATION	AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
FEAT	SPECIAL FEATURES	80 PCT FULL OF MIL-G-81322 ALSO AXIAL PLAY 0.0055 IN. MAX ALSO HEAT TREAT RINGS AND BALLS TO ROCKWELL C60 TO C66 AND STABILIZED FOR OPERATION AT 250 DEG F ALSO 10 DEG SELF-ALIGNING IN EITHER DIRECTION
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE SEAL
MATT	MATERIAL	STEEL COMP E52100 OR STEEL COMP E51100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MATT	MATERIAL	STEEL COMP E52100 OUTER RING
MATT	MATERIAL	STEEL CORROSION RESISTING RETAINER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL
SFTT	SURFACE TREATMENT	CADMIUM BALL
SFTT	SURFACE TREATMENT	CADMIUM INNER RING
SFTT	SURFACE TREATMENT	CADMIUM OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
STYL	STYLE DESIGNATOR	DOUBLE ROW,SELF ALIGNING