AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number AN951RE3F4 from Aeronautical Standards Group (CAGE Code 88044), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number AN951RE3F4 Details:
Part number AN951RE3F4 is manufactured by Aeronautical Standards Group and listed with the item name Bearing Ball Rod End. Classified under NSN 3110-01-248-6246, the NIIN of this item is 012486246, its INC is 00049, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-248-6246 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 012486246 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3110001735073 | 6 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM |
| AAZF | SHANK STYLE | INTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 1.7455 INCHES MINIMUM AND 1.7855 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.1897 INCHES MINIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 0.7188 INCHES MINIMUM AND 0.7812 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS365 ASSN STD SINGLE MATERIAL RESPONSE OR AMS3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
