AN870-12 Part by Aeronautical Standards Group with NSN 4730-01-257-1520 - Request a Quote Now

Part Number: AN870-12

Manufacturer: aeronautical standards group

NSN: 4730-01-257-1520

CAGE Code: 88044

NIIN: 012571520

Item Name : flange pipe

INC Code: 03798

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

FSC: 4730 Hose Pipe Tube Lubrication and Railing Fittings

For competitive procurement options on part number AN870-12 from Aeronautical Standards Group (CAGE Code 88044), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AN870-12 Details:

Part number AN870-12 is manufactured by Aeronautical Standards Group and listed with the item name Flange Pipe. Classified under NSN 4730-01-257-1520, the NIIN of this item is 012571520, its INC is 03798, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4730 Hose Pipe Tube Lubrication and Railing Fittings. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN870-12

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AN870-12 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number AN870-12 with NSN 4730-01-257-1520, 4730012571520

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4730-01-257-1520 Item PartTypeName: FLANGE,PIPE	4730	012571520	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
AN870-12	2	2	2

Characteristics Data of NSN 4730-01-257-1520, 4730012571520

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
ABGA	GROOVE DEPTH	0.125 INCHES NOMINAL
ABGF	GROOVE WIDTH	0.312 INCHES NOMINAL
ABKK	FLANGE DIAMETER	1.750 INCHES NOMINAL
ABNM	THICKNESS	0.250 INCHES NOMINAL
AJEG	NECK HEIGHT	0.062 INCHES NOMINAL
AJEM	FLANGE SECTION STYLE	PLAIN FACE,RAISED NECK
AJEY	GROOVE PITCH DIAMETER	1.312 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNF
AKWE	FACE SEATING SURFACE CONDITION	UNFINISHED
CQJX	NOMINAL THREAD SIZE	0.750 INCHES
FEAT	SPECIAL FEATURES	LOOP FOR PLUG LOCKWIRE WELDED IN PLACE
MATT	MATERIAL	ALUMINUM
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-411 FED SPEC SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	ROUND,NO BOLT HOLES
ZZZK	SPECIFICATION/STANDARD DATA	88044-AN870 GOVERNMENT STANDARD