AN43B-C4 Part by Aeronautical Standards Group with NSN 5306-01-016-7867 - Request a Quote Now

Part Number: AN43B-C4

Manufacturer: aeronautical standards group

NSN: 5306-01-016-7867

CAGE Code: 88044

NIIN: 010167867

Item Name : bolt eye

INC Code: 01853

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5306 Bolts

For competitive procurement options on part number AN43B-C4 from Aeronautical Standards Group (CAGE Code 88044), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AN43B-C4 Details:

Part number AN43B-C4 is manufactured by Aeronautical Standards Group and listed with the item name Bolt Eye. Classified under NSN 5306-01-016-7867, the NIIN of this item is 010167867, its INC is 01853, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5306 Bolts. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN43B-C4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AN43B-C4 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number AN43B-C4 with NSN 5306-01-016-7867, 5306010167867

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-01-016-7867 Item PartTypeName: BOLT,EYE	5306	010167867	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
AN43B-C4	5	2	3

Characteristics Data of NSN 5306-01-016-7867, 5306010167867

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.453 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
AATK	EYE INSIDE DIAMETER	0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
AATP	SHOULDER THICKNESS	0.078 INCHES NOMINAL
AATR	SHANK LENGTH	0.515 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
AAUA	EYE STOCK THICKNESS	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
AAVH	SHOULDER DIAMETER	0.500 INCHES NOMINAL
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
ABHP	OVERALL LENGTH	1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
CRHT	DISTANCE FROM CENTER OF EYE TO SHANK END	1.015 INCHES NOMINAL
CWXM	EYE OUTSIDE WIDTH	0.500 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 431 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STYL	STYLE DESIGNATOR	ROUND,CLOSED W/SHOULDER
THSD	THREAD SERIES DESIGNATOR	UNF