AN342016 Part by Aeronautical Standards Group with NSN 5365-00-141-6943 - Request a Quote Now

Part Number: AN342016

Manufacturer: aeronautical standards group

NSN: 5365-00-141-6943

CAGE Code: 88044

NIIN: 001416943

Item Name : bushing nonmetallic

INC Code: 39929

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5365 Bushings Rings Shims and Spacers

For competitive procurement options on part number AN342016 from Aeronautical Standards Group (CAGE Code 88044), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AN342016 Details:

Part number AN342016 is manufactured by Aeronautical Standards Group and listed with the item name Bushing Nonmetallic. Classified under NSN 5365-00-141-6943, the NIIN of this item is 001416943, its INC is 39929, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5365 Bushings Rings Shims and Spacers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN342016

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AN342016 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number AN342016 with NSN 5365-00-141-6943, 5365001416943

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-00-141-6943 Item PartTypeName: BUSHING,NONMETALLIC	5365	001416943	U	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10118426	2	9	6

Characteristics Data of NSN 5365-00-141-6943, 5365001416943

MRC	Criteria	Characteristic
AASF	NONMETALLIC HARDNESS RATING	45.0 MINIMUM DUROMETER AND 55.0 MAXIMUM DUROMETER
ABHP	OVERALL LENGTH	2.125 INCHES NOMINAL
ABKK	FLANGE DIAMETER	1.314 INCHES NOMINAL
ABPM	BODY DIAMETER	0.927 INCHES NOMINAL
ADAQ	BODY LENGTH	2.062 INCHES NOMINAL
ADYT	CENTER HOLE DIAMETER	0.750 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	MRAP-COMMON NSN-USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 153 OTHER WEAPON SYSTEMS INCLUDING Z9N-AIRCRAFT,FA-18,A-D,E/F,G (GROWLER)
AHGD	FLANGE HEIGHT	0.062 INCHES NOMINAL
APGF	DESIGN TYPE	SINGLE CENTRALLY LOCATED HOLE
BFKZ	BODY CORNER RADIUS	0.062 INCHES NOMINAL
BWSD	FLANGE END HOLE CORNER RADIUS	0.062 INCHES NOMINAL
BWSF	CORNER RADIUS BETWEEN FLANGE AND BODY	0.062 INCHES NOMINAL
MATT	MATERIAL	RUBBER CHLOROPRENE CLASS CR
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-STD-417,TYPE S,CLASS SC,GRADE SC515A1B1C1E3E5F2GM MIL STD SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	ROUND FLANGED