E1242A-002 Part by Agilent Technologies Inc with NSN 6625-01-421-5835 - Request a Quote Now

Part Number: E1242A-002

Manufacturer: agilent technologies inc

NSN: 6625-01-421-5835

CAGE Code: 1MY97

NIIN: 014215835

Item Name : probe lead assembly

INC Code: 39884

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6625 Electrical And Electronic Properties Measuring And Testing Instruments

For competitive procurement options on part number E1242A-002 from Agilent Technologies Inc (CAGE Code 1MY97), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number E1242A-002 Details:

Part number E1242A-002 is manufactured by Agilent Technologies Inc and listed with the item name Probe Lead Assembly. Classified under NSN 6625-01-421-5835, the NIIN of this item is 014215835, its INC is 39884, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6625 Electrical And Electronic Properties Measuring And Testing Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for E1242A-002

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part E1242A-002 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6625-01-421-5835, 6625014215835

MRC	Criteria	Characteristic
SR-5	MANUFACTURERS CODE	1LQK8
AGAV	III END ITEM IDENTIFICATION	HP ATS 2000 H61 TEST SYSTEM; F15-E TEST STATION
SR-5	THE MANUFACTURERS DATA
SR-5	DESIGN CONTROL REFERENCE	E1242A-002
TEXT	GENERAL CHARACTERISTICS ITEM DESCRIPTION	E1242A-002 CAN BE INSTALLED INTO HP82000 MAXIFRAMES(E1202A OR E1203A); FOR STANDARD FRAMES INSTALL E1242A-001); THIS PROBE ASSY E1242A-002 C/O PROBE HOUSING E1242A, HP PROBE 54701A, RISETIME CONVERTER 15438A; IO CABLE E1242-61604; AC CABLE E1242-61601; 2 TIE RAPS 1400-0747; TIE RAP 1400-0824; COAX CABLE E1242-61607; MAGNETIC HOLSTER E1242-00204; AIR GUIDING SHIELD E1222-64112; THIS PROBE IS ORDERED WITH HP82000 MAXIFRAME AND INSTALLED WITH HP82000SYSTEM SOFTWARE CONFIGURATION; MANUAL PROBE COMES IN A SEPARATE BOX AND MUST BE ASSEMBLED BEFORE UPGRADING A MAXIFRAME