MD1-2065 Part by Alaska Structures Inc with NSN 8340-01-516-4015 - Request a Quote Now

Part Number: MD1-2065

Manufacturer: alaska structures inc

NSN: 8340-01-516-4015

CAGE Code: 0GC93

NIIN: 015164015

Item Name : tent

INC Code: 10873

Country: USA

NCB Code: 01

FSG: 83 Textiles Leather Furs Apparel and Shoe Findings Tents and Flags

FSC: 8340 Tents and Tarpaulins

For competitive procurement options on part number MD1-2065 from Alaska Structures Inc (CAGE Code 0GC93), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number MD1-2065 Details:

Part number MD1-2065 is manufactured by Alaska Structures Inc and listed with the item name Tent. Classified under NSN 8340-01-516-4015, the NIIN of this item is 015164015, its INC is 10873, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 83 Textiles Leather Furs Apparel and Shoe Findings Tents and Flags and Class (FSC) 8340 Tents and Tarpaulins. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MD1-2065

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part MD1-2065 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 8340-01-516-4015, 8340015164015

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
AQJL	Floor Material	VINYL
FEAT	Special Features	MEDICAL DVLPMT-TYPE I, GREEN, SHELTER INCLUDES: 1EA ALUMINUM FRAME SYSTEM WITH A 6.5FT. CENTER FRAME; 2EA 32.5FT. COVER SECTIONS UTILIZING 14.5OZ MILITARY SPEC. VINYL, GROUND FLAPS ON COVER HAS BEEN INCREASED BY 6 INCHES, BECKET/LACING CONNECTOR FLAPS HAVE BEEN ADDED TO EACH COVER SECTION, 4EA PULL-OVER LOOPS HAVE BEEN ADDED TO EACH 32.5FT. COVER SECTION; 2EA 32.5FT. FLOOR SECTIONS UTILIZING 14OZ. NON-SLIP VINYL; 2EA INSULATED END PANELS WITH 1EA 5FT.X6.5FT. ZIPPERED ENTRY, 1EA 30IN.X42IN. NETTED VENT WINDOW, 2EA 18IN. ENVIRONMENTAL CONTROL UNIT (ECU) PORTS WITH 20IN. FABRIC SLEEVES, AND 2EA 6IN. PORTS; 4EA 5FT.X6.5FT. ZIPPERED SIDE ENTRIES WITH TEMPER TENT CONNECTOR FLAPS; 16EA SIDE WINDOWS; 8EA 6 IN. PORTS; 3EA HANDLES PER COVER SECTION; 1EA SET OF INSULATION LINERS WITH WINDOWS; 1EA SPIKE PULLER; 2EA 32FT. PLENUMS; 1EA ELECTRICAL DISTRIBUTION BOX PLATE; 1EA ANCHOR PACKAGE WITH DOUBLE-HEADED SPIKES AND GUY ROPES/SPIKES MODIFIED FLAT BASE PIECES AT EACH ENTRY(6)
AQDX	Tent Type	FRAME
HUES	Color	GREEN
AQJD	Floor Shape	RECTANGULAR
MATT	Material	VINYL
AKKK	Cloth Weight	14.500 OUNCES PER SQUARE YARD NOMINAL
ABRY	Length	65.000 FEET NOMINAL