HL1031-8-10 Part by Alcoa Global Fasteners Inc with NSN 5320-01-524-9944 - Request a Quote Now

Part Number: HL1031-8-10

Manufacturer: alcoa global fasteners inc

NSN: 5320-01-524-9944

CAGE Code: 92215

NIIN: 015249944

Item Name : pin rivet

INC Code: 67165

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5320 Rivets

For competitive procurement options on part number HL1031-8-10 from Alcoa Global Fasteners Inc (CAGE Code 92215), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number HL1031-8-10 Details:

Part number HL1031-8-10 is manufactured by Alcoa Global Fasteners Inc and listed with the item name Pin Rivet. Classified under NSN 5320-01-524-9944, the NIIN of this item is 015249944, its INC is 67165, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5320 Rivets. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HL1031-8-10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part HL1031-8-10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5320-01-524-9944, 5320015249944

MRC	Criteria	Characteristic
CRSQ	Countersink Angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MDCL	Material Document And Classification	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CQJX	Nominal Thread Size	0.250 INCHES
AAZU	Tip Diameter	0.241 INCHES MINIMUM AND 0.244 INCHES MAXIMUM
AAJD	Thread Class	3A
MRC	Decoded Requirement	Clear Text Reply
SFTT	Surface Treatment	CADMIUM OVERALL OR NICKEL OVERALL AND CADMIUM OVERALL
AASK	Head Style	FLUSH COUNTERSUNK
CQFM	Hardness Rating	50.0 ROCKWELL C MINIMUM OVERALL AND 55.0 ROCKWELL C MAXIMUM OVERALL
AAZE	Shank Diameter	0.279 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
CMLP	Thread Quantity Per Inch	28
STDC	Surface Treatment Document And Classification	MIL-C-8837, TY II, CL 2 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OVERALL
CXCY	Part Name Assigned By Controlling Agency	SHEAR THREADED PIN
THSD	Thread Series Designator	UNJF
ANEE	Grip Length	0.625 INCHES NOMINAL
AAZG	Head Major Diameter	0.421 INCHES MINIMUM AND 0.426 INCHES MAXIMUM
AAZF	Shank Style	PIN-RIVET, TAPERED, THREADED
AAJF	Thread Direction	RIGHT-HAND
MATT	Material	STEEL COMP H11 OVERALL