RLRR5647SB10 Part by Alcoa Global Fasteners Inc with NSN 5365-01-496-5761 - Request a Quote Now

Part Number: RLRR5647SB10

Manufacturer: alcoa global fasteners inc

NSN: 5365-01-496-5761

CAGE Code: 83324

NIIN: 014965761

Item Name : ring lock serrated

INC Code: 16013

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5365 Bushings Rings Shims and Spacers

For competitive procurement options on part number RLRR5647SB10 from Alcoa Global Fasteners Inc (CAGE Code 83324), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number RLRR5647SB10 Details:

Part number RLRR5647SB10 is manufactured by Alcoa Global Fasteners Inc and listed with the item name Ring Lock Serrated. Classified under NSN 5365-01-496-5761, the NIIN of this item is 014965761, its INC is 16013, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5365 Bushings Rings Shims and Spacers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RLRR5647SB10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part RLRR5647SB10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number RLRR5647SB10 with NSN 5365-01-496-5761, 5365014965761

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-01-496-5761 Item PartTypeName: RING,LOCK,SERRATED	5365	014965761	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
RLRR5647SA10	5	2	3

Characteristics Data of NSN 5365-01-496-5761, 5365014965761

MRC	Criteria	Characteristic
AARX	INSIDE DIAMETER	0.571 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.574 INCHES NOMINAL
ABKW	OVERALL HEIGHT	0.161 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.906 INCHES MINIMUM AND 0.915 INCHES MAXIMUM
AGAV	III END ITEM IDENTIFICATION	F-15 AIRCRAFT
AWPM	OUTER SERRATION QUANTITY	24
AWPN	INNER SERRATION QUANTITY	26
CXCY	III PART NAME ASSIGNED BY CONTROLLING AGENCY	LOCKRING-OVERSIZE
FEAT	SPECIAL FEATURES	RADIANS 2 PLACES OPPOSITE EACH OTHER 80-90 DEGREES;NO SPECIFIC ANGULARITY EXISTS BETWEEN INTERNAL AND EXTERNAL SERRATIONS.THE SERATED SECTORS WILL BELOCATED DIAMETRICALLY OPPOSITE.PART WILL HAVE CADMIUM PLATE FINISH PERQQ-P-416,TYPE II,CL 3
MATT	MATERIAL	STEEL