4M30D816-032 Part by All Power Manufacturing Co Inc with NSN 5310-01-233-0598 - Request a Quote Now

Part Number: 4M30D816-032

Manufacturer: all power manufacturing co inc

NSN: 5310-01-233-0598

CAGE Code: 70265

NIIN: 012330598

Item Name : nut spacer plate

INC Code: 17667

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number 4M30D816-032 from All Power Manufacturing Co Inc (CAGE Code 70265), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 4M30D816-032 Details:

Part number 4M30D816-032 is manufactured by All Power Manufacturing Co Inc and listed with the item name Nut Spacer Plate. Classified under NSN 5310-01-233-0598, the NIIN of this item is 012330598, its INC is 17667, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4M30D816-032

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 4M30D816-032 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 4M30D816-032 with NSN 5310-01-233-0598, 5310012330598

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-233-0598 Item PartTypeName: NUT SPACER,PLATE	5310	012330598	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4M30D816-032	6	2	3

Characteristics Data of NSN 5310-01-233-0598, 5310012330598

MRC	Criteria	Characteristic
ABTB	MOUNTING HOLE DIAMETER	0.129 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
ACTA	NUT STYLE	PLATE NUT SPACER
ACVN	NUT LENGTH	1.531 INCHES NOMINAL
ADAZ	THRU-HOLE DIAMETER	0.562 INCHES NOMINAL
ADEB	PLATE THICKNESS	0.032 INCHES NOMINAL
ADEC	PLATE WIDTH	0.813 INCHES NOMINAL
ADFP	NUT MOUNTING PROVISION	STRAIGHT HOLES
ADFU	MOUNTING HOLE ARRANGEMENT STYLE	2 HOLES
ADFW	DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER	0.622 INCHES MINIMUM AND 0.628 INCHES MAXIMUM
ADFY	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH	1.247 INCHES MINIMUM AND 1.253 INCHES MAXIMUM
MATT	MATERIAL	ALUMINUM ALLOY 2024 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL