RV891S3 3 Part by Allfast Fastening Systems Inc with NSN 5320-01-313-6364 - Request a Quote Now

Part Number: RV891S3 3

Manufacturer: allfast fastening systems inc

NSN: 5320-01-313-6364

CAGE Code: 53551

NIIN: 013136364

Item Name : rivet blind

INC Code: 00864

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5320 Rivets

For competitive procurement options on part number RV891S3 3 from Allfast Fastening Systems Inc (CAGE Code 53551), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number RV891S3 3 Details:

Part number RV891S3 3 is manufactured by Allfast Fastening Systems Inc and listed with the item name Rivet Blind. Classified under NSN 5320-01-313-6364, the NIIN of this item is 013136364, its INC is 00864, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5320 Rivets. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RV891S3 3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part RV891S3 3 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number RV891S3 3 with NSN 5320-01-313-6364, 5320013136364

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5320-01-313-6364 Item PartTypeName: RIVET,BLIND	5320	013136364		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				S
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
RV891S3-3	5	2	3

Characteristics Data of NSN 5320-01-313-6364, 5320013136364

MRC	Criteria	Characteristic
AAZG	HEAD MAJOR DIAMETER	0.190 INCHES MAXIMUM
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-N-281 FED SPEC ALL MATERIAL RESPONSES STEM
AASK	HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER)
ANEE	GRIP LENGTH	0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
SFTT	SURFACE TREATMENT	SILVER SLEEVE
AAZE	SHANK DIAMETER	0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
ABAJ	LUBRICATION	DRY FILM
AASB	FASTENER LENGTH	0.273 INCHES MAXIMUM
AAZF	SHANK STYLE	SELF-PLUGGING HIGH CLINCH SHANK
ABAF	EXPANSION DEVICE	SERRATED STEM-TYPE W
CRSQ	COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
MATT	MATERIAL	NICKEL ALLOY 400 OR NICKEL ALLOY R-405 SLEEVE
MATT	MATERIAL	NICKEL ALLOY 400 OR NICKEL ALLOY R-405 STEM
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-N-281 FED SPEC ALL MATERIAL RESPONSES SLEEVE