AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 35965 from Allied Systems Corp (CAGE Code 60848), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 35965 Details:
Part number 35965 is manufactured by Allied Systems Corp and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-383-2329, the NIIN of this item is 013832329, its INC is 20311, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-383-2329 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013832329 | M | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 234338 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 2.100 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.406 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AGFF | FLANGE WIDTH | 3.160 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| CRXX | MEASURING METHOD AND LENGTH | 102.000 INCHES NOMINAL WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND AIR AND WATER AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| AAJD | THREAD CLASS | 2B 1ST END |
| AARX | INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.620 INCHES NOMINAL 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 20.000 INCHES |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL 2ND END |
| AFQN | FLANGE LENGTH | 3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM 2ND END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX | NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
