62-0015 Part by Alvin And Co Inc with NSN 6675-00-813-9108 - Request a Quote Now

Part Number: 62-0015

Manufacturer: alvin and co inc

NSN: 6675-00-813-9108

CAGE Code: 23366

NIIN: 008139108

Item Name : planimeter

INC Code: 04415

Country: USA

NCB Code: 00

FSG: 66 Instruments and Laboratory Equipment

FSC: 6675 Drafting Surveying And Mapping Instruments

For competitive procurement options on part number 62-0015 from Alvin And Co Inc (CAGE Code 23366), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 62-0015 Details:

Part number 62-0015 is manufactured by Alvin And Co Inc and listed with the item name Planimeter. Classified under NSN 6675-00-813-9108, the NIIN of this item is 008139108, its INC is 04415, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6675 Drafting Surveying And Mapping Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 62-0015

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 62-0015 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6675-00-813-9108, 6675008139108

MRC	Criteria	Characteristic
ADNM	FRAME MATERIAL	ANY ACCEPTABLE
SURF	SURFACE TREATMENT	ANY ACCEPTABLE
BBMZ	ARM MATERIAL	ANY ACCEPTABLE
BBNF	NEEDLE MATERIAL	ANY ACCEPTABLE
BBNG	TRACER ARM EFFECTIVE LENGTH	2.500 INCHES MINIMUM AND 7.000 INCHES MAXIMUM
BBNH	POLE ARM MAXIMUM LENGTH	13.000 INCHES
AFJU	CARRYING CASE	PROVIDED
BBNL	VERNIER MINIMUM READING	0.010 SQUARE INCHES AND 0.04 SQUARE CENTIMETERS
ANEX	CARRYING CASE QUANTITY	1
APQB	UNIT TYPE	POLAR
ANBW	POINT MATERIAL	ANY ACCEPTABLE