ANSI BHMA A156 5 TYPE E0122 Part by American National Standards with NSN 5340-01-029-7940 - Request a Quote Now

Part Number: ANSI BHMA A156 5 TYPE E0122

Manufacturer: american national standards

NSN: 5340-01-029-7940

CAGE Code: 80204

NIIN: 010297940

Item Name : lock set mortise

INC Code: 06701

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number ANSI BHMA A156 5 TYPE E0122 from American National Standards (CAGE Code 80204), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number ANSI BHMA A156 5 TYPE E0122 Details:

Part number ANSI BHMA A156 5 TYPE E0122 is manufactured by American National Standards and listed with the item name Lock Set Mortise. Classified under NSN 5340-01-029-7940, the NIIN of this item is 010297940, its INC is 06701, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ANSI BHMA A156 5 TYPE E0122

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part ANSI BHMA A156 5 TYPE E0122 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number ANSI BHMA A156 5 TYPE E0122 with NSN 5340-01-029-7940, 5340010297940

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-029-7940 Item PartTypeName: LOCK SET,MORTISE	5340	010297940	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2221	6	9	5

Characteristics Data of NSN 5340-01-029-7940, 5340010297940

MRC	Criteria	Characteristic
ABGL	WIDTH	1.000 INCHES NOMINAL
ABNM	THICKNESS	1.375 INCHES NOMINAL OVERALL
ABNM	THICKNESS	2.375 INCHES NOMINAL BACKSET
APGF	DESIGN TYPE	LATCH BOLT
APHE	OPERATION METHOD	INSIDE TURN KNOB AND OUTSIDE KEY LATCH BOLT
ASBH	FACE SHAPE	FLAT
BTJY	BOLT TYPE	REVERSIBLE BEVEL
CHLZ	LOCKING MECHANISM TYPE	PIN TUMBLER
HGTH	HEIGHT	2.250 INCHES NOMINAL
MATT	MATERIAL	COPPER ALLOY FACE
SFTT	SURFACE TREATMENT	COPPER ALLOY CASE
SFTT	SURFACE TREATMENT	COPPER ALLOY FACE
SHPE	SHAPE	ROUND CASE
ZZZK	SPECIFICATION/STANDARD DATA	80205-80204-ANSI BHMA 501 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD