ASTM D2000 Part by American Society For Testing with NSN 9320-00-180-9901 - Request a Quote Now

Part Number: ASTM D2000

Manufacturer: american society for testing

NSN: 9320-00-180-9901

CAGE Code: 81346

NIIN: 001809901

Item Name : rubber sheet solid

Country: USA

NCB Code: 00

FSG: 93 Nonmetallic Fabricated Materials

FSC: 9320 Rubber Fabricated Materials

For competitive procurement options on part number ASTM D2000 from American Society For Testing (CAGE Code 81346), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number ASTM D2000 Details:

Part number ASTM D2000 is manufactured by American Society For Testing and listed with the item name Rubber Sheet Solid. Classified under NSN 9320-00-180-9901, the NIIN of this item is 001809901, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 93 Nonmetallic Fabricated Materials and Class (FSC) 9320 Rubber Fabricated Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ASTM D2000

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part ASTM D2000 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 9320-00-180-9901, 9320001809901

MRC	Criteria	Characteristic
ABGL	Width	36.000 INCHES NOMINAL
MATT	Material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
AASH	Minimum Tensile Strength	1000 POUNDS PER SQUARE INCH
MRC	Decoded Requirement	Clear Text Reply
HUES	Color	BLACK BOTH SIDES
AASF	Nonmetallic Hardness Rating	35.0 MINIMUM SHORE DUROMETER A AND 45.0 MAXIMUM SHORE DUROMETER A
ADTX	Surface Condition	SMOOTH BOTH SIDES
ADZC	Environmental Protection	LOW TEMPERATURE AND OIL RESISTANT
ABNM	Thickness	0.250 INCHES NOMINAL
ABRY	Length	36.000 INCHES NOMINAL
MDCL	Material Document And Classification	MIL-STD-417, TYPE S, CLASS SB, GRADE SB410F2 MIL SPEC SINGLE MATERIAL RESPONSE