GS-23-1 Part by Ampex Data Systems Corporation with NSN 6695-01-090-4259 - Request a Quote Now

Part Number: GS-23-1

Manufacturer: ampex data systems corporation

NSN: 6695-01-090-4259

CAGE Code: 09150

NIIN: 010904259

Item Name : transducer motional

INC Code: 61282

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6695 Combination And Miscellaneous Instruments

For competitive procurement options on part number GS-23-1 from Ampex Data Systems Corporation (CAGE Code 09150), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number GS-23-1 Details:

Part number GS-23-1 is manufactured by Ampex Data Systems Corporation and listed with the item name Transducer Motional. Classified under NSN 6695-01-090-4259, the NIIN of this item is 010904259, its INC is 61282, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6695 Combination And Miscellaneous Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GS-23-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part GS-23-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6695-01-090-4259, 6695010904259

MRC	Criteria	Characteristic
AMSE	VOLTAGE RATING	12.0 VOLTS MAXIMUM
FEAT	SPECIAL FEATURES	COMPONENT IS INTENDED FOR OPERATION IN AIR;COMPONENT WILL BE REQUIRED TO WITHSTAND A MINIMUM PRESSURE OF 1.3 PSI WITHOUT DAMAGE OR PERMANENT CALIBRATION ERROR DUE TO HYSTERESIS COMPONENT SHALL BE UNAFFECTED BY ANY ALTITUDE BETWEEN ZERO AND 3000 FEET;THE OPERATING TEMPERATURE RANGE SHALL BE FROM A NEGATIVE 40 DEGREES CELCIUS TO A POSITIVE 75 DEG CELCIUS;COMPONENT SHALL ALSO ACCOMMODATE AN EXTERNAL LOAD OF 43000 OHMS AND OUTPUT IMPEDANCE OF THE DEVICE SHALL BE A MAXIMUM OF 5000 OHMS;RESPONSE TIME SHALL BE NO GREATER THAN 15 MILLISECONDS
ABKW	OVERALL HEIGHT	1.135 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.378 INCHES MAXIMUM
ZZZV	III FSC APPLICATION DATA	TEST SET,ELECTRONIC SYSTEMS,EXCEPT SPECIALLY DESIGNED
ACDC	CURRENT TYPE	DC
ABMK	OVERALL WIDTH	1.435 INCHES MAXIMUM