413D Part by Apex Tool Group Llc with NSN 5210-00-529-2107 - Request a Quote Now

Part Number: 413D

Manufacturer: apex tool group llc

NSN: 5210-00-529-2107

CAGE Code: 96508

NIIN: 005292107

Item Name : tape measuring

INC Code: 18459

Country: USA

NCB Code: 00

FSG: 52 Measuring Tools

FSC: 5210 measuring Tools Craftsmens

For competitive procurement options on part number 413D from Apex Tool Group Llc (CAGE Code 96508), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 413D Details:

Part number 413D is manufactured by Apex Tool Group Llc and listed with the item name Tape Measuring. Classified under NSN 5210-00-529-2107, the NIIN of this item is 005292107, its INC is 18459, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 52 Measuring Tools and Class (FSC) 5210 measuring Tools Craftsmens. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 413D

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 413D with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 413D with NSN 5210-00-529-2107, 5210005292107

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5210-00-529-2107 Item PartTypeName: TAPE,MEASURING	5210	005292107	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
403D	5	9	5

Characteristics Data of NSN 5210-00-529-2107, 5210005292107

MRC	Criteria	Characteristic
ABGL	WIDTH	0.625 INCHES NOMINAL
AKNA	INCLOSURE TYPE	CASE
APGF	DESIGN TYPE	GENERAL PURPOSE DISTANCE MEASURING
APTD	END TYPE	NONBUTT
AQRE	WINDING METHOD	HAND CRANK
BQWH	MATERIAL CHARACTERISTIC	WOVEN
BTHJ	NATIONAL BUREAU OF STANDARDS CERTIFICATION	NOT PROVIDED
CMWC	READING DIRECTION	LEFT TO RIGHT
CMWK	STANDARD GRADUATION UNIT	FEET
CMWL	MEASURING CAPACITY	50 FEET
CMWM	TAPE SMALLEST GRADUATION UNIT	1/10 AND 1/20 FT
CNJN	PLUMB BOB	NOT INCLUDED
FEAT	SPECIAL FEATURES	ROUND VINYL COVERED STEEL CASE; FOLDAWAY REWIND HANDLE
MATT	MATERIAL	FIBER SYNTHETIC