7C1-4H Part by Arconic Global Fasteners And Rings with NSN 5340-01-251-4385 - Request a Quote Now

Part Number: 7C1-4H

Manufacturer: arconic global fasteners and rings

NSN: 5340-01-251-4385

CAGE Code: 71286

NIIN: 012514385

Item Name : clamp loop

INC Code: 17532

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number 7C1-4H from Arconic Global Fasteners And Rings (CAGE Code 71286), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 7C1-4H Details:

Part number 7C1-4H is manufactured by Arconic Global Fasteners And Rings and listed with the item name Clamp Loop. Classified under NSN 5340-01-251-4385, the NIIN of this item is 012514385, its INC is 17532, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7C1-4H

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 7C1-4H with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 7C1-4H with NSN 5340-01-251-4385, 5340012514385

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-251-4385 Item PartTypeName: CLAMP,LOOP	5340	012514385	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
7C1-4H	5	2	3

Characteristics Data of NSN 5340-01-251-4385, 5340012514385

MRC	Criteria	Characteristic
AAAL	TONGUE HOLE TYPE	ROUND,UNTHREADED
ABHP	OVERALL LENGTH	1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM
ABJH	TEMP RATING	750.0 DEG FAHRENHEIT
ABMK	OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
AXWJ	FASTENING DEVICE TYPE	SLOTTED HEXAGON HEAD SCREW
BZTN	LOOP INSIDE DIAMETER	0.250 INCHES NOMINAL
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL