ABDAM23 Part by Asset Systems Inc with NSN 4910-00-256-8831 - Request a Quote Now

Part Number: ABDAM23

Manufacturer: asset systems inc

NSN: 4910-00-256-8831

CAGE Code: 06350

NIIN: 002568831

Item Name : lathe brake drum

INC Code: 08074

Country: USA

NCB Code: 00

FSG: 49 Maintenance and Repair Shop Equipment

FSC: 4910 Motor Vehicle Maintenance And Repair Shop Specialized Equipment

For competitive procurement options on part number ABDAM23 from Asset Systems Inc (CAGE Code 06350), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number ABDAM23 Details:

Part number ABDAM23 is manufactured by Asset Systems Inc and listed with the item name Lathe Brake Drum. Classified under NSN 4910-00-256-8831, the NIIN of this item is 002568831, its INC is 08074, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 49 Maintenance and Repair Shop Equipment and Class (FSC) 4910 Motor Vehicle Maintenance And Repair Shop Specialized Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ABDAM23

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part ABDAM23 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4910-00-256-8831, 4910002568831

MRC	Criteria	Characteristic
BTTD	RATED SWING	NOT RATED
AAXX	MOUNTING TYPE	FLOOR
BTYY	MINIMUM DRUM DIAMETER ACCOMMODATED	7.500 INCHES
AKYD	ACCESSORY COMPONENTS AND QUANTITY	STAND,1
ASHK	ELECTRIC MOTOR HORSEPOWER RATING	0.500 AND 0.250
BLWD	MAXIMUM CUTTING DEPTH	9.000 INCHES
ACDC	CURRENT TYPE	AC/DC
FREQ	FREQUENCY IN HERTZ	60.0
SR-5	MANUFACTURERS CODE	06350
SR-5	DESIGN CONTROL REFERENCE	B35
SR-5	THE MANUFACTURERS DATA
BTYX	MAXIMUM DRUM DIAMETER ACCOMMODATED	24.000 INCHES
BTYZ	CUTTING TOOL TYPE	ROTATING
BTZB	GRINDING PROVISION	INCLUDED
FAAZ	PHASE	SINGLE
ELEC	VOLTAGE IN VOLTS	110.0
ALTL	ELECTRICAL MOTOR USAGE DESIGN	TURNING AND GRINDING
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	BTZB