MMI-9968 Part by At And T Corp with NSN 6625-00-308-2722 - Request a Quote Now

Part Number:  MMI-9968
Manufacturer:  at and t corp
CAGE Code:  70408
NIIN:  003082722
Item Name :  meter arbitrary sca
INC Code:  16476
Country:  USA
NCB Code:  00

For competitive procurement options on part number MMI-9968 from At And T Corp (CAGE Code 70408), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number MMI-9968 Details:

Part number MMI-9968 is manufactured by At And T Corp and listed with the item name Meter Arbitrary Sca. Classified under NSN 6625-00-308-2722, the NIIN of this item is 003082722, its INC is 16476, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6625 Electrical And Electronic Properties Measuring And Testing Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MMI-9968

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part MMI-9968 with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6625-00-308-2722, 6625003082722

MRCCriteriaCharacteristic
STYLSTYLE DESIGNATORC1 ROUND FLUSH MTG
AXHRMOUNTING FACILITY TYPE AND QUANTITY3 SCREW AND 3 UNTHREADED HOLE
AMKDINDICATOR TYPEDIAL W/POINTER
AQECMOVEMENT TYPEMOVING COIL, PERMANENT MAGNET
ABHPOVERALL LENGTH2.150 INCHES MAXIMUM
AMQYINSTALLATION DESIGNPANEL
CTQLMOVEMENT SUSPENSION METHODJEWEL PIVOT BASE
APMMDIAL SCALE MARKING COLORGREEN, PHOSPHORESCENT SINGLE INDICATOR SINGLE RANGE
ASSSPOINTER COLORBLACK AND GREEN, PHOSPHORESCENT SINGLE INDICATOR SINGLE RANGE
AFFLMOUNTING BOLT CIRCLE DIAMETER2.430 INCHES MINIMUM AND 2.450 INCHES MAXIMUM
ZZZVIII FSC APPLICATION DATATEST SET,ELECT. EQUIP.
APPNACCURACY IN PERCENT-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
AQFYBACKGROUND COLORBLACK SINGLE INDICATOR SINGLE RANGE
ASTWSCALE MARKING20,10,0,10,20
SUPPIII SUPPLEMENTARY FEATURESRUGGEDIZED
SFTTSURFACE TREATMENTPAINT
APSN(NON-CORE DATA) PANEL FOR WHICH DESIGNEDMAGNETIC OR NONMAGNETIC
ADAVOVERALL DIAMETER2.695 INCHES MAXIMUM
AKYNFURNISHED ITEMS AND QUANTITYNUT 3; WASHER 3
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY2 SCREW AND 2 SOLDER LUG
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
BHDCSCALE GRADUATION TYPELINEAR SINGLE INDICATOR SINGLE RANGE
FEATSPECIAL FEATURES105 OHMS TERM. RES
ABTBMOUNTING HOLE DIAMETER0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
MATTMATERIALSTEEL
ANTGSENSITIVITY RATING500.0 MICROAMPERES
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS3000.0
CBBLFEATURES PROVIDEDMAGNETIC SHIELD AND ZERO ADJUSTER
NHCFNUCLEAR HARDNESS CRITICAL FEATURENONHARDENED
APSWMETER BODY DIAMETER BEHIND MOUNTING FLANGE2.210 INCHES MAXIMUM
SPCLSPECIAL TEST FEATURESGREEN PHOSPHORESCENT PER MIL-L-4996; METER PER MIL-M-10304
ANRLMOUNTING ARRANGEMENT STYLETHREE HOLE/STUD BOLT CIRCLE
APSTMETER DEPTH BEHIND MOUNTING FLANGE1.405 INCHES MAXIMUM
ABWGSCALE DIVISION QUANTITY50 SINGLE INDICATOR SINGLE RANGE
ADZCENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND VIBRATION RESISTANT



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top