G807671 Part by At And T Document Development with NSN 5340-01-314-6930 - Request a Quote Now

Part Number: G807671

Manufacturer: at and t document development

NSN: 5340-01-314-6930

CAGE Code: 1D309

NIIN: 013146930

Item Name : rod end threaded

INC Code: 30474

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number G807671 from At And T Document Development (CAGE Code 1D309), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number G807671 Details:

Part number G807671 is manufactured by At And T Document Development and listed with the item name Rod End Threaded. Classified under NSN 5340-01-314-6930, the NIIN of this item is 013146930, its INC is 30474, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for G807671

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part G807671 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number G807671 with NSN 5340-01-314-6930, 5340013146930

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-314-6930 Item PartTypeName: ROD END,THREADED	5340	013146930	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
G807671	5	9	5

Characteristics Data of NSN 5340-01-314-6930, 5340013146930

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A OVERALL
AAJF	THREAD DIRECTION	RIGHT-HAND OVERALL
AASA	THREAD LENGTH	0.620 INCHES NOMINAL ROD CONNECTION
ABHP	OVERALL LENGTH	3.240 INCHES NOMINAL
ABKK	FLANGE DIAMETER	0.625 INCHES NOMINAL
ADDE	UNTHREADED END LENGTH	2.000 INCHES NOMINAL
AGFF	FLANGE WIDTH	0.500 INCHES NOMINAL
AKYR	UNTHREADED END OUTSIDE DIAMETER	0.438 INCHES NOMINAL
AKYS	UNTHREADED END INSIDE DIAMETER	0.250 INCHES NOMINAL
AKYT	UNTHREADED END DEPTH	0.620 INCHES NOMINAL
FEAT	SPECIAL FEATURES	FLANGE IS HEX; 0.120 IN. BEFORE THDS START
MATT	MATERIAL	COPPER ALLOY 360 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-626,COMP 360,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYL	STYLE DESIGNATOR	EXTERNAL THREAD,FLANGED,TUBULAR END
THSD	THREAD SERIES DESIGNATOR	UNF ROD CONNECTION
CQJX	NOMINAL THREAD SIZE	0.625 INCHES ROD CONNECTION