995-C Part by Atap Inc with NSN 6680-01-158-5973 - Request a Quote Now

Part Number: 995-C

Manufacturer: atap inc

NSN: 6680-01-158-5973

CAGE Code: 22638

NIIN: 011585973

Item Name : generator tachomete

INC Code: 20241

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments

For competitive procurement options on part number 995-C from Atap Inc (CAGE Code 22638), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 995-C Details:

Part number 995-C is manufactured by Atap Inc and listed with the item name Generator Tachomete. Classified under NSN 6680-01-158-5973, the NIIN of this item is 011585973, its INC is 20241, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 995-C

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 995-C with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6680-01-158-5973, 6680011585973

MRC	Criteria	Characteristic
BKPC	CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS	16.0 DC
AAJV	OVERALL WIDTH	1.800 INCHES
AXGY	MOUNTING METHOD	SWIVEL NUT COUPLING
TTQY	TERMINAL TYPE AND QUANTITY	3 BINDING POST
CWCS	LENGTH OF SHAFT FROM HOUSING	1.210 INCHES SINGLE END
ABWV	SHAFT DIAMETER	0.1240 INCHES NOMINAL SINGLE END
AKCT	SHAFT ROTATION DIRECTION	CLOCKWISE OR COUNTERCLOCKWISE SINGLE END
CWHZ	SHAFT END CHARACTERISTIC	A1 SINGLE STYLE SINGLE END
CWFX	ROTOR SPEED RATING IN RPM	2500.0 SINGLE FULL LOAD
AAJU	OVERALL LENGTH	2.580 INCHES
CBBL	FEATURES PROVIDED	HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	1 UNTHREADED STUD
AAJT	OVERALL HEIGHT	1.800 INCHES