4M279-08002 Part by Avalon Machine Products Inc with NSN 3120-01-169-5633 - Request a Quote Now

Part Number: 4M279-08002

Manufacturer: avalon machine products inc

NSN: 3120-01-169-5633

CAGE Code: 23294

NIIN: 011695633

Item Name : bushing sleeve

INC Code: 13206

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3120 Bearings Plain Unmounted

For competitive procurement options on part number 4M279-08002 from Avalon Machine Products Inc (CAGE Code 23294), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 4M279-08002 Details:

Part number 4M279-08002 is manufactured by Avalon Machine Products Inc and listed with the item name Bushing Sleeve. Classified under NSN 3120-01-169-5633, the NIIN of this item is 011695633, its INC is 13206, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4M279-08002

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 4M279-08002 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 4M279-08002 with NSN 3120-01-169-5633, 3120011695633

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-169-5633 Item PartTypeName: BUSHING,SLEEVE	3120	011695633	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10108186	5	9	6

Characteristics Data of NSN 3120-01-169-5633, 3120011695633

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	0.6400 INCHES MINIMUM AND 0.6470 INCHES MAXIMUM
ADAR	BODY OUTSIDE DIAMETER	0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	0.4735 INCHES MINIMUM AND 0.4745 INCHES MAXIMUM
AEPR	FLANGE OUTSIDE DIAMETER	0.7300 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0600 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE ALL CORNERS
FEAT	SPECIAL FEATURES	FLANGE END COUNTERBORED 0.4900 IN. MIN,0.4940 IN. MAX DIA,0.0600 IN. MIN,0.0620 IN. MAX DP; FOR INSTALLATION PURPOSES ID ONLY SHALL BE DRY FILM LUBRICATED PER P.S. 18021,CL 1,WITH A CETYL ALCOHOL OVERCOAT PER P.S. 18015
MATT	MATERIAL	COPPER ALLOY 173 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-530,COND H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE LEFT END SURFACE OF BODY AND FLANGE
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OUTSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE RIGHT END SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE RIGHT END SURFACE OF LEFT FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END