AS303-25-12 Part by Avibank Mfg Inc with NSN 5305-01-265-8955 - Request a Quote Now

Part Number: AS303-25-12

Manufacturer: avibank mfg inc

NSN: 5305-01-265-8955

CAGE Code: 84256

NIIN: 012658955

Item Name : screw close tolerance

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number AS303-25-12 from Avibank Mfg Inc (CAGE Code 84256), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AS303-25-12 Details:

Part number AS303-25-12 is manufactured by Avibank Mfg Inc and listed with the item name Screw Close Tolerance. Classified under NSN 5305-01-265-8955, the NIIN of this item is 012658955, its INC is 29294, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AS303-25-12

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AS303-25-12 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number AS303-25-12 with NSN 5305-01-265-8955, 5305012658955

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-265-8955 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	012658955	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
123256-5R2512	5	2	3

Characteristics Data of NSN 5305-01-265-8955, 5305012658955

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.228 INCHES MINIMUM AND 0.378 INCHES MAXIMUM
AASB	FASTENER LENGTH	1.228 INCHES MINIMUM AND 1.248 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
AAUM	LOCKING FEATURE	DETENT BALL GRIP
AAUR	GRIP DIAMETER	0.3108 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
AHYM	NOMINAL THREAD DIAMETER	0.312 INCHES
ANEE	GRIP LENGTH	0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.123 INCHES MINIMUM AND 1.138 INCHES MAXIMUM FIRST HOLE
CSYM	SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
CSYM	SURFACE FINISH	32.0 MICROINCHES GRIP
CSYM	SURFACE FINISH	32.0 MICROINCHES THREADS
FEAT	SPECIAL FEATURES	INTERNAL DRIVE RIBBED
MATT	MATERIAL	STEEL COMP 630 OR STEEL COMP 631 OR STEEL COMP 440C LOCKING FEATURE
MATT	MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 FASTENER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS5644 ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE LOCKING FEATURE
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE FASTENER
SFTT	SURFACE TREATMENT	PASSIVATE LOCKING FEATURE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LOCKING FEATURE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THSD	THREAD SERIES DESIGNATOR	UNJF