PBF1266-9D44 Part by B E Aerospace with NSN 5306-01-165-3313 - Request a Quote Now

Part Number: PBF1266-9D44

Manufacturer: b e aerospace

NSN: 5306-01-165-3313

CAGE Code: 2V484

NIIN: 011653313

Item Name : bolt close tolerance

INC Code: 27851

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5306 Bolts

For competitive procurement options on part number PBF1266-9D44 from B E Aerospace (CAGE Code 2V484), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PBF1266-9D44 Details:

Part number PBF1266-9D44 is manufactured by B E Aerospace and listed with the item name Bolt Close Tolerance. Classified under NSN 5306-01-165-3313, the NIIN of this item is 011653313, its INC is 27851, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5306 Bolts. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PBF1266-9D44

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PBF1266-9D44 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number PBF1266-9D44 with NSN 5306-01-165-3313, 5306011653313

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-01-165-3313 Item PartTypeName: BOLT,CLOSE TOLERANCE	5306	011653313	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10116053	2	9	6

Characteristics Data of NSN 5306-01-165-3313, 5306011653313

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.699 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
AASB	FASTENER LENGTH	3.459 INCHES MINIMUM AND 3.506 INCHES MAXIMUM
AASK	HEAD STYLE	SPLINE DRIVE SHEAR HEAD
AASU	HEAD HEIGHT	0.328 INCHES NOMINAL
AATB	WIDTH BETWEEN FLATS	0.904 INCHES MINIMUM AND 0.912 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.5610 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
AHYM	NOMINAL THREAD DIAMETER	0.562 INCHES
ANEE	GRIP LENGTH	2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	18
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.330 INCHES MINIMUM AND 3.387 INCHES MAXIMUM FIRST HOLE
MATT	MATERIAL	STEEL COMP XM-13 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF