278712 Part by B V R Technologies Co with NSN 5310-01-352-2088 - Request a Quote Now

Part Number: 278712

Manufacturer: b v r technologies co

NSN: 5310-01-352-2088

CAGE Code: 85374

NIIN: 013522088

Item Name : washer flat

INC Code: 13393

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number 278712 from B V R Technologies Co (CAGE Code 85374), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 278712 Details:

Part number 278712 is manufactured by B V R Technologies Co and listed with the item name Washer Flat. Classified under NSN 5310-01-352-2088, the NIIN of this item is 013522088, its INC is 13393, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 278712

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 278712 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 278712 with NSN 5310-01-352-2088, 5310013522088

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-352-2088 Item PartTypeName: WASHER,FLAT	5310	013522088	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
278712	5	2	3

Characteristics Data of NSN 5310-01-352-2088, 5310013522088

MRC	Criteria	Characteristic
ABMX	CENTER HOLE SHAPE STYLE	ROUND
CRFT	OUTSIDE RIGHT CORNER CHAMFER ANGLE	45.0 DEGREES NOMINAL
CRJY	INSIDE LEFT CORNER CHAMFER ANGLE	45.0 DEGREES NOMINAL
CSZZ	INSIDE RIGHT CORNER CHAMFER ANGLE	45.0 DEGREES NOMINAL
ABNM	THICKNESS	0.0245 INCHES MINIMUM AND 0.0255 INCHES MAXIMUM
CQZT	OUTSIDE LEFT CORNER CHAMFER ANGLE	45.0 DEGREES NOMINAL
MATT	MATERIAL	STEEL COMP 304 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM-A167,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
AAGR	CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
AAUB	HOLE DIAMETER	0.2502 INCHES MINIMUM AND 0.2507 INCHES MAXIMUM
ABMW	PERIPHERAL SHAPE STYLE	ROUND
ADAV	OVERALL DIAMETER	0.459 INCHES MINIMUM AND 0.461 INCHES MAXIMUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL