278483 Part by B V R Technologies Co with NSN 5365-01-273-6304 - Request a Quote Now

Part Number: 278483

Manufacturer: b v r technologies co

NSN: 5365-01-273-6304

CAGE Code: 85374

NIIN: 012736304

Item Name : spacer plate

INC Code: 26979

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5365 Bushings Rings Shims and Spacers

For competitive procurement options on part number 278483 from B V R Technologies Co (CAGE Code 85374), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 278483 Details:

Part number 278483 is manufactured by B V R Technologies Co and listed with the item name Spacer Plate. Classified under NSN 5365-01-273-6304, the NIIN of this item is 012736304, its INC is 26979, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5365 Bushings Rings Shims and Spacers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 278483

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 278483 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 278483 with NSN 5365-01-273-6304, 5365012736304

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-01-273-6304 Item PartTypeName: SPACER,PLATE	5365	012736304	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
278483	5	2	3

Characteristics Data of NSN 5365-01-273-6304, 5365012736304

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.094 INCHES NOMINAL
ABHP	OVERALL LENGTH	0.750 INCHES NOMINAL
ABMK	OVERALL WIDTH	0.380 INCHES NOMINAL
ADPW	OUTSIDE CORNER RADIUS	0.070 INCHES MINIMUM
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.562 INCHES NOMINAL
ADVE	OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.090 INCHES NOMINAL
ADVJ	BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.190 INCHES NOMINAL
AECS	BOLT HOLE QUANTITY	2
MATT	MATERIAL	ALUMINUM ALLOY 2024
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	NON-CIRCULAR W/CORNER RADIUS