AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number M01075 from Bae Systems Inc (CAGE Code 80249), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number M01075 Details:
Part number M01075 is manufactured by Bae Systems Inc and listed with the item name Motor Control. Classified under NSN 6105-00-349-6896, the NIIN of this item is 003496896, its INC is 19258, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 61 Electric Wire and Power and Distribution Equipment and Class (FSC) 6105 Motors Electrical. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-349-6896 Item PartTypeName: MOTOR,CONTROL | 6105 | 003496896 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11993 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 2.875 INCHES |
| AAJU | OVERALL LENGTH | 4.562 INCHES |
| AAJV | OVERALL WIDTH | 2.375 INCHES |
| AASA | THREAD LENGTH | 0.120 INCHES NOMINAL FIRST END |
| ABND | TAPER LENGTH | 0.179 INCHES MINIMUM AND 0.189 INCHES MAXIMUM FIRST END |
| ABPA | UNDERCUT DIAMETER | 0.075 INCHES NOMINAL FIRST END |
| ABWV | SHAFT DIAMETER | 0.112 INCHES NOMINAL FIRST END |
| ABWV | SHAFT DIAMETER | 0.156 INCHES NOMINAL SECOND END |
| ABXQ | FLATTED PORTION LENGTH | 0.7500 INCHES NOMINAL SECOND END |
| ACDC | CURRENT TYPE | AC INPUT |
| AGQL | UNDERCUT LENGTH | 0.030 INCHES NOMINAL FIRST END |
| AGRB | FLAT DEPTH | 0.016 INCHES MINIMUM AND 0.017 INCHES MAXIMUM SECOND END |
| ANPZ | ENCLOSURE FEATURE | TOTALLY INCLOSED |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 4900.0 AND 5100.0 |
| BFML | CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM FIRST END |
| BKPH | TORQUE RATING AND TYPE | 5.0 INCH-OUNCES STALLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 300.0 AC |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES FIRST END |
| CQRR | TAPER | 8.000 PER FOOT IN INCHES FIRST END |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES FIRST END |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.062 INCHES SECOND END |
| CWDY | TEMP RATING | -29.0 AMBIENT DEG CELSIUS AND 65.0 AMBIENT DEG CELSIUS |
| CWFX | ROTOR SPEED RATING IN RPM | 3300.0 SINGLE NO LOAD |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.920 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.500 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND A4 SECOND STYLE AND A28 THIRD STYLE FIRST END |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SECOND END |
| FAAZ | PHASE | TWO INPUT |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 0.157 IN. DIA; SHAFT END THIRD STYLE 0.112 IN. DIA |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| THSD | THREAD SERIES DESIGNATOR | UNF FIRST END |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
