31W-0174 Part by Bae Systems Land And Armaments Inc with NSN 5340-01-311-7163 - Request a Quote Now

Part Number: 31W-0174

Manufacturer: bae systems land and armaments inc

NSN: 5340-01-311-7163

CAGE Code: 44114

NIIN: 013117163

Item Name : bracket angle

INC Code: 16900

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number 31W-0174 from Bae Systems Land And Armaments Inc (CAGE Code 44114), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 31W-0174 Details:

Part number 31W-0174 is manufactured by Bae Systems Land And Armaments Inc and listed with the item name Bracket Angle. Classified under NSN 5340-01-311-7163, the NIIN of this item is 013117163, its INC is 16900, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 31W-0174

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 31W-0174 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 31W-0174 with NSN 5340-01-311-7163, 5340013117163

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-311-7163 Item PartTypeName: BRACKET,ANGLE	5340	013117163	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
31W-0174	5	2	5

Characteristics Data of NSN 5340-01-311-7163, 5340013117163

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	1.500 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	2.500 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	105 MM AN/AWG-30 TRAINABLE GUN MOUNT AND 105 MM GUN,C130 ACFT
AHLN	SECOND LEG HOLE DIAMETER	0.513 INCHES MINIMUM AND 0.523 INCHES MAXIMUM
AHLP	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	1.380 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.750 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.187 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	2.880 INCHES NOMINAL
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	2.250 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.875 INCHES NOMINAL
AJZU	FIRST LEG STYLE	SQUARE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	TWO HOLES
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
STYL	STYLE DESIGNATOR	ANGLE
SFTT	SURFACE TREATMENT	LACQUER
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-L-11195 MIL SPEC 1ST TREATMENT RESPONSE
AHLF	SECOND LEG WIDTH	2.880 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.187 INCHES NOMINAL
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE
AHLK	FIRST LEG HOLE DIAMETER	0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.312 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026
ACHY	MOUNTING HOLE TYPE	PLAIN
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.620 INCHES NOMINAL
AKBU	SECOND LEG STYLE	SQUARE
FEAT	SPECIAL FEATURES	TECH ORDER 11W1-33-7-2 FIG 6