MDJ46-16NAS Part by Bearing Engineers Inc with NSN 3110-01-323-8091 - Request a Quote Now

Part Number: MDJ46-16NAS

Manufacturer: bearing engineers inc

NSN: 3110-01-323-8091

CAGE Code: 05341

NIIN: 013238091

Item Name : bearing ball rod end

INC Code: 00049

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number MDJ46-16NAS from Bearing Engineers Inc (CAGE Code 05341), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number MDJ46-16NAS Details:

Part number MDJ46-16NAS is manufactured by Bearing Engineers Inc and listed with the item name Bearing Ball Rod End. Classified under NSN 3110-01-323-8091, the NIIN of this item is 013238091, its INC is 00049, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MDJ46-16NAS

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part MDJ46-16NAS with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number MDJ46-16NAS with NSN 3110-01-323-8091, 3110013238091

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-323-8091 Item PartTypeName: BEARING,BALL,ROD END	3110	013238091	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MDJ46-16NAS	6	2	3

Characteristics Data of NSN 3110-01-323-8091, 3110013238091

MRC	Criteria	Characteristic
AGVU	INNER RING WIDTH	0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
AGZA	ALIGNMENT TYPE	RIGID
MATT	MATERIAL	STEEL COMP 303 OR STEEL COMP 303SE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A484 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 7440 ASSN STD SINGLE MATERIAL RESPONSE BALL
SFTT	SURFACE TREATMENT	CHROMIUM BALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BALL
THSD	THREAD SERIES DESIGNATOR	UNF
AAJD	THREAD CLASS	3A
AAZF	SHANK STYLE	EXTERNALLY THREADED
ABHP	OVERALL LENGTH	2.4995 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.8650 INCHES MINIMUM AND 0.8850 INCHES MAXIMUM
AGGY	SHANK THREAD LENGTH	1.5000 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.3300 INCHES MINIMUM AND 0.3400 INCHES MAXIMUM
AGXH	LENGTH FROM BORE CENTER TO SHANK END	2.0520 INCHES MINIMUM AND 2.0720 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24
MATT	MATERIAL	STEEL COMP 1118 OR STEEL COMP 1137 ROD END BODY
MATT	MATERIAL	STEEL COMP E52100 BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
CQJX	NOMINAL THREAD SIZE	0.3750 INCHES
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
AAJF	THREAD DIRECTION	RIGHT-HAND
ABXV	BORE DIAMETER	0.2495 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM
STYL	STYLE DESIGNATOR	SINGLE ROW,BALL