AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 206-001-185-1 from Bell Helicopter Textron Inc (CAGE Code 97499), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 206-001-185-1 Details:
Part number 206-001-185-1 is manufactured by Bell Helicopter Textron Inc and listed with the item name Bearing Unit Ball. Classified under NSN 3130-00-182-8628, the NIIN of this item is 001828628, its INC is 30556, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3130 Bearings Mounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-182-8628 Item PartTypeName: BEARING UNIT,BALL | 3130 | 001828628 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 206-001-185-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 1.055 INCHES MINIMUM AND 1.057 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.075 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 2.335 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.830 INCHES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| FEAT | SPECIAL FEATURES | 2ND MTG HOLE 0.312 IN. DIA MI TO 0.313 IN. DIA MAX |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | ALUMINUM ALLOY 2014 HOUSING |
| MATT | MATERIAL | STEEL COMP E51100 OR STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RACE |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING AND PLASTIC POLYTETRAFLUOROETHYLENE OR STEEL CORROSION RESISTING AND GLASS FIBER AND PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE ALIGNING RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS 3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE HOUSING |
| SFTT | SURFACE TREATMENT | CADMIUM INNER RACE |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RACE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| TEST | TEST DATA DOCUMENT | 97499-BPS 4075 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
