4M226A5NH Part by Boeing Company The with NSN 5310-01-133-4875 - Request a Quote Now

Part Number: 4M226A5NH

Manufacturer: boeing company the

NSN: 5310-01-133-4875

CAGE Code: 76301

NIIN: 011334875

Item Name : washer convex

INC Code: 15931

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number 4M226A5NH from Boeing Company The (CAGE Code 76301), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 4M226A5NH Details:

Part number 4M226A5NH is manufactured by Boeing Company The and listed with the item name Washer Convex. Classified under NSN 5310-01-133-4875, the NIIN of this item is 011334875, its INC is 15931, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4M226A5NH

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 4M226A5NH with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 4M226A5NH with NSN 5310-01-133-4875, 5310011334875

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-133-4875 Item PartTypeName: WASHER,CONVEX	5310	011334875	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10109683	6	9	6

Characteristics Data of NSN 5310-01-133-4875, 5310011334875

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM
ABKV	OUTSIDE DIAMETER	0.582 INCHES MINIMUM AND 0.592 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.104 INCHES MINIMUM AND 0.124 INCHES MAXIMUM
CQFM	HARDNESS RATING	40.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
CSYM	SURFACE FINISH	63.0 MICROINCHES BOTTOM
MATT	MATERIAL	STEEL COMP 4130 OR STEEL COMP 8740 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6358 ASSN STD 2ND MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	CONVEX