AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number N1225-1 from C E Niehoff And Co (CAGE Code 76761), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number N1225-1 Details:
Part number N1225-1 is manufactured by C E Niehoff And Co and listed with the item name Generator Engine Ac. Classified under NSN 2920-01-420-9968, the NIIN of this item is 014209968, its INC is 17311, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 29 Engine Accessories and Class (FSC) 2920 Engine Electrical System Components Nonaircraft. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-01-420-9968 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 014209968 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Z | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12447109 | 5 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| ABRR | KEYWAY WIDTH | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM" |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND" |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED" |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT" |
| AFYS | KEYWAY LENGTH | 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM" |
| AGAV | END ITEM IDENTIFICATION | 2320-01-380-8604; WEAPON SYSTEM E/I TRUCK, VEHICLE SYSTEM, 1 1/4-TON (HMMWV)" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE" |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 200.0" |
| BCGN | GROUNDING METHOD | EXTERNAL" |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY" |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL" |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 170.0" |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.281 INCHES MINIMUM AND 7.332 INCHES MAXIMUM" |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.471 INCHES MINIMUM AND 8.548 INCHES MAXIMUM" |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES MINIMUM AND 0.469 INCHES MAXIMUM" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000" |
| BZRR | THREAD SERIES | UNF" |
| CFHL | THREAD CLASS | 3A" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC" |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16" |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| ELEC | VOLTAGE IN VOLTS | 28.0" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| ABRR | KEYWAY WIDTH | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM" |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND" |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED" |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT" |
| AFYS | KEYWAY LENGTH | 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM" |
| AGAV | END ITEM IDENTIFICATION | 2320-01-380-8604; WEAPON SYSTEM E/I TRUCK, VEHICLE SYSTEM, 1 1/4-TON (HMMWV)" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE" |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 200.0" |
| BCGN | GROUNDING METHOD | EXTERNAL" |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY" |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL" |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 170.0" |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.281 INCHES MINIMUM AND 7.332 INCHES MAXIMUM" |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.471 INCHES MINIMUM AND 8.548 INCHES MAXIMUM" |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES MINIMUM AND 0.469 INCHES MAXIMUM" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000" |
| BZRR | THREAD SERIES | UNF" |
| CFHL | THREAD CLASS | 3A" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC" |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16" |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| ELEC | VOLTAGE IN VOLTS | 28.0" |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
