AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number CCH11191 from Cantwell Cullen Hydraulic Division (CAGE Code 3AD25), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number CCH11191 Details:
Part number CCH11191 is manufactured by Cantwell Cullen Hydraulic Division and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-459-5116, the NIIN of this item is 014595116, its INC is 20311, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-459-5116 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014595116 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2206940 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJD | THREAD CLASS | 3B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.880 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | 2320-01-392-0293" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END" |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END" |
| CQBD | BURST TEST PRESSURE | 17000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 4250.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 1.188 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 1.188 INCHES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 8500.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 27.280 INCHES NOMINAL OVERALL" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UN 2ND END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJD | THREAD CLASS | 3B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.880 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | 2320-01-392-0293" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END" |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END" |
| CQBD | BURST TEST PRESSURE | 17000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 4250.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 1.188 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 1.188 INCHES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 8500.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 27.280 INCHES NOMINAL OVERALL" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UN 2ND END" |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
