50100S-7 Part by Cecom Lr Center with NSN 6680-01-046-7249 - Request a Quote Now

Part Number: 50100S-7

Manufacturer: cecom lr center

NSN: 6680-01-046-7249

CAGE Code: 97403

NIIN: 010467249

Item Name : gage liquid quantity float type

INC Code: 18727

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments

For competitive procurement options on part number 50100S-7 from Cecom Lr Center (CAGE Code 97403), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 50100S-7 Details:

Part number 50100S-7 is manufactured by Cecom Lr Center and listed with the item name Gage Liquid Quantity Float Type. Classified under NSN 6680-01-046-7249, the NIIN of this item is 010467249, its INC is 18727, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 50100S-7

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 50100S-7 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6680-01-046-7249, 6680010467249

MRC	Criteria	Characteristic
AGAV	End Item Identification	4520-00-001-7726
FEAT	Special Features	CAP,VENTED,MATL,PLASTIC,GAGE MATL,STEEL,FLOAT,7.00 IN. LG
BJDM	Float Material	ANY ACCEPTABLE
BJDP	Float Guide Wire	NOT PROVIDED
AMKD	Indicator Type	DIAL
BJDS	Oil Seal	NOT PROVIDED
AMNK	Scale Calibration	E TO F
BJDN	Float Protective Case	NOT PROVIDED
TEST	Test Data Document	97403-13219E2423 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
ATEQ	Scale Type	STATIONARY
AWAG	Scale Smallest Increment	0.250 UNITS
MRC	Decoded Requirement	Clear Text Reply
AXGY	Mounting Method	FLANGE BASE
AAMW	Flange Diameter	2.250 INCHES