3N41A Part by Clark Material Handling Company with NSN 3110-00-183-7505 - Request a Quote Now

Part Number: 3N41A

Manufacturer: clark material handling company

NSN: 3110-00-183-7505

CAGE Code: 89749

NIIN: 001837505

Item Name : bearing roller needle

INC Code: 00051

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number 3N41A from Clark Material Handling Company (CAGE Code 89749), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 3N41A Details:

Part number 3N41A is manufactured by Clark Material Handling Company and listed with the item name Bearing Roller Needle. Classified under NSN 3110-00-183-7505, the NIIN of this item is 001837505, its INC is 00051, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3N41A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 3N41A with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 3N41A with NSN 3110-00-183-7505, 3110001837505

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-183-7505 Item PartTypeName: BEARING,ROLLER,NEEDLE	3110	001837505		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
13641	2	2	3

Characteristics Data of NSN 3110-00-183-7505, 3110001837505

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	0.9373 INCHES MINIMUM AND 0.9423 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.7590 INCHES MINIMUM AND 0.7610 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	1.2480 INCHES MINIMUM AND 1.2490 INCHES MAXIMUM
AGZA	ALIGNMENT TYPE	RIGID
FEAT	SPECIAL FEATURES	CLOSED END; RETAINING WASHER AT OPEN END SIDE; OD UNDERCUT AT OPEN END; SLOT 0.3750 IN. W BY 0.0700 IN. DEEP IN FACE OF BEARING AT CLOSED END SIDE
MATT	MATERIAL	STEEL OVERALL
STYL	STYLE DESIGNATOR	NON-SEPARABLE,WITH ROLLER RETAINER,HARDENED AND GROUND