MIL-L-13896 Part by Clausing Industrial Inc with NSN 3416-01-449-9890 - Request a Quote Now

Part Number: MIL-L-13896

Manufacturer: clausing industrial inc

NSN: 3416-01-449-9890

CAGE Code: 64501

NIIN: 014499890

Item Name : lathe engine

INC Code: 03137

Country: USA

NCB Code: 01

FSG: 34 Metalworking Machinery

FSC: 3416 Lathes

For competitive procurement options on part number MIL-L-13896 from Clausing Industrial Inc (CAGE Code 64501), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number MIL-L-13896 Details:

Part number MIL-L-13896 is manufactured by Clausing Industrial Inc and listed with the item name Lathe Engine. Classified under NSN 3416-01-449-9890, the NIIN of this item is 014499890, its INC is 03137, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 34 Metalworking Machinery and Class (FSC) 3416 Lathes. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MIL-L-13896

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part MIL-L-13896 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3416-01-449-9890, 3416014499890

MRC	Criteria	Characteristic
BTSZ	SPINDLE SPEED QUANTITY	20
BTTB	SPINDLE SPEED RANGE IN RPM	20.0 TO 1600.0
BTWC	RATED SWING THROUGH OPEN GAP	41.000 INCHES NOMINAL
BTWD	ACTUAL SWING THROUGH OPEN GAP	41.000 INCHES NOMINAL
BTWF	RATED SWING OVER CLOSED GAP	30.000 INCHES NOMINAL
BTWL	HEADSTOCK DRIVE TYPE	GEARED HEAD
BTWM	HEADSTOCK CENTER TAPER SIZE DESIGNATOR	6 MORSE
SR-1	SPEC/STD CONTROLLING DATA
BTYP	HOLE DIAMETER THROUGH SPINDLE	6.375 INCHES NOMINAL
ASHK	ELECTRIC MOTOR HORSEPOWER RATING	30.000
BTZR	THREAD QUANTITY RANGE	0.3 TO 112.0 PER INCH
ELEC	VOLTAGE IN VOLTS	208.0 AND 230.0 AND 460.0
AWHA	BED TYPE	REMOVABLE BLOCK GAP
AAXX	MOUNTING TYPE	FLOOR
SR-1	MANUFACTURERS CODE	81349
APGF	DESIGN TYPE	SCREW
SR-1	NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MIL-L-13896
ADQR	CENTER TO CENTER DISTANCE	120.000 INCHES NOMINAL
BTTG	SWING OVER CROSS SLIDE	20.375 INCHES NOMINAL
BTWB	THREAD CHANGE QUANTITY	88