MB1002-1 Part by Comco Plastics Inc with NSN 4940-01-290-2086 - Request a Quote Now

Part Number: MB1002-1

Manufacturer: comco plastics inc

NSN: 4940-01-290-2086

CAGE Code: 50325

NIIN: 012902086

Item Name : blast cleaning machine

INC Code: 10890

Country: USA

NCB Code: 01

FSG: 49 Maintenance and Repair Shop Equipment

FSC: 4940 Miscellaneous Maintenance And Repair Shop Specialized Equipment

For competitive procurement options on part number MB1002-1 from Comco Plastics Inc (CAGE Code 50325), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number MB1002-1 Details:

Part number MB1002-1 is manufactured by Comco Plastics Inc and listed with the item name Blast Cleaning Machine. Classified under NSN 4940-01-290-2086, the NIIN of this item is 012902086, its INC is 10890, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 49 Maintenance and Repair Shop Equipment and Class (FSC) 4940 Miscellaneous Maintenance And Repair Shop Specialized Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MB1002-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part MB1002-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4940-01-290-2086, 4940012902086

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
BWPX	Abrasive Tank Compartment Type	DOUBLE
AKYD	Accessory Components And Quantity	DUST COLLECTOR 1,DESICCANT AIR DRYER 1,REPLACEMENT PARTS KIT 1,WALNUT SHELLS,25 LBS
BWPZ	Abrasive Tank Maximum Operating Pressure	125.0 POUNDS PER SQUARE INCH
FTLD	Functional Description	USED TO REMOVE COATINGS ON THE UUT SO CLIPS MAY BE ATTACHED TO INCREASE FAULT ISOLATION
BWPW	Abrasive Type Accommodated	DRY
BWQC	Instantaneous Blast Stop/Start Valve	NOT INCLUDED
AMQY	Installation Design	PORTABLE
BWPY	Blast Hose Outlet Quantity	1