3218AS782-1 Part by Computa Base Machining Inc with NSN 5340-01-550-1306 - Request a Quote Now

Part Number: 3218AS782-1

Manufacturer: computa base machining inc

NSN: 5340-01-550-1306

CAGE Code: 0A396

NIIN: 015501306

Item Name : plate mounting

INC Code: 40223

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number 3218AS782-1 from Computa Base Machining Inc (CAGE Code 0A396), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 3218AS782-1 Details:

Part number 3218AS782-1 is manufactured by Computa Base Machining Inc and listed with the item name Plate Mounting. Classified under NSN 5340-01-550-1306, the NIIN of this item is 015501306, its INC is 40223, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3218AS782-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 3218AS782-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 3218AS782-1 with NSN 5340-01-550-1306, 5340015501306

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-550-1306 Item PartTypeName: PLATE,MOUNTING	5340	015501306	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
3218AS782-1	5	9	3

Characteristics Data of NSN 5340-01-550-1306, 5340015501306

MRC	Criteria	Characteristic
ABGL	WIDTH	11.000 INCHES NOMINAL
ABNM	THICKNESS	2.000 INCHES NOMINAL
ABRY	LENGTH	11.000 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	MH-60R SEAHAWK SE
CKSN	RAISED SURFACE LENGTH	11.000 INCHES NOMINAL
CKSR	RAISED SURFACE HEIGHT	0.750 INCHES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	(INAVY) BASE, TABLE, LIFT, TABLE, LIFT, CABLE REEL
FEAT	SPECIAL FEATURES	BASE, TABLE LIFT HAVING 4 EACH 0.344 INCH THROUGH HOLES CENTRALLY LOCATED 1.045 INCHES FROM CORNER EDGES AND EACH HAVING A 0.750 INCH DIAMETER ALUMINUM ALLOY SPACER; ALSO HAVING 8 EACH 0.375-16 UNC-2B HELICAL COIL INSERTS LOCATED 3 EACH CEN
MATT	MATERIAL	ALUMINUM ALLOY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/8 ASSN STD SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	ANODIZE
SHPE	SHAPE	SQUARE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TYPE III, CLASS 2 MIL STD SINGLE TREATMENT RESPONSE
ABGL	WIDTH	11.000 INCHES NOMINAL
ABNM	THICKNESS	2.000 INCHES NOMINAL
ABRY	LENGTH	11.000 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	MH-60R SEAHAWK SE
CKSN	RAISED SURFACE LENGTH	11.000 INCHES NOMINAL
CKSR	RAISED SURFACE HEIGHT	0.750 INCHES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	(INAVY) BASE, TABLE, LIFT, TABLE, LIFT, CABLE REEL
FEAT	SPECIAL FEATURES	BASE, TABLE LIFT HAVING 4 EACH 0.344 INCH THROUGH HOLES CENTRALLY LOCATED 1.045 INCHES FROM CORNER EDGES AND EACH HAVING A 0.750 INCH DIAMETER ALUMINUM ALLOY SPACER; ALSO HAVING 8 EACH 0.375-16 UNC-2B HELICAL COIL INSERTS LOCATED 3 EACH CEN
MATT	MATERIAL	ALUMINUM ALLOY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/8 ASSN STD SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	ANODIZE
SHPE	SHAPE	SQUARE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TYPE III, CLASS 2 MIL STD SINGLE TREATMENT RESPONSE