20664-14 Part by Computer Automation Inc with NSN 6625-01-075-4749 - Request a Quote Now

Part Number: 20664-14

Manufacturer: computer automation inc

NSN: 6625-01-075-4749

CAGE Code: 53908

NIIN: 010754749

Item Name : controller test ele

INC Code: 45808

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6625 Electrical And Electronic Properties Measuring And Testing Instruments

For competitive procurement options on part number 20664-14 from Computer Automation Inc (CAGE Code 53908), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 20664-14 Details:

Part number 20664-14 is manufactured by Computer Automation Inc and listed with the item name Controller Test Ele. Classified under NSN 6625-01-075-4749, the NIIN of this item is 010754749, its INC is 45808, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6625 Electrical And Electronic Properties Measuring And Testing Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 20664-14

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 20664-14 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6625-01-075-4749, 6625010754749

MRC	Criteria	Characteristic
SR-5	THE MANUFACTURERS DATA
FEAT	SPECIAL FEATURES	CABLE 16.5 FT. OVERALL;4 FT. FROM I/O DISTRIBUTOR TO PICOPROCESSOR;12 FT. FROM PICOPROCESSOR TO IEEE BUS;PICOPROCESSOR IS 1 X 3 X 8 IN.;DEVICE END HAS ONE 24-PIN AMPHENOL SERIES 57 MALE CONNECTOR;I/O DISTRIBUTOR END HAS TWO 16-PIN DIP PLUGS;POWER REQUIREMENTS 1.0A AT 5VDC;COMPATIBLE W/ALL LSI SERIES COMPUTERS AND ALL I/O DISTRIBUTORS;PART OF COMP ASSY 7560836-011;USED ON 7561887-011
AGAV	III END ITEM IDENTIFICATION	AN/ALQ-172SE
SR-5	DESIGN CONTROL REFERENCE	20664-14
SR-5	MANUFACTURERS CODE	53908