4000F-6 Part by Cooper Power Tools Inc with NSN 5130-01-388-9933 - Request a Quote Now

Part Number: 4000F-6

Manufacturer: cooper power tools inc

NSN: 5130-01-388-9933

CAGE Code: 79852

NIIN: 013889933

Item Name : sander oscillating pad pneumatic

Country: USA

NCB Code: 01

FSG: 51 Hand Tools

FSC: 5130 Hand Tools Power Driven

For competitive procurement options on part number 4000F-6 from Cooper Power Tools Inc (CAGE Code 79852), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 4000F-6 Details:

Part number 4000F-6 is manufactured by Cooper Power Tools Inc and listed with the item name Sander Oscillating Pad Pneumatic. Classified under NSN 5130-01-388-9933, the NIIN of this item is 013889933, its INC is , and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 51 Hand Tools and Class (FSC) 5130 Hand Tools Power Driven. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4000F-6

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 4000F-6 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5130-01-388-9933, 5130013889933

MRC	Criteria	Characteristic
FEAT	Special Features	OPPOSED STRAIGHT LINE; PADS DRIVEN BY HORIZONTALLY OPPOSED INLINE PISTONS; 3/4 IN. STROKE; 4-8 SHEET PAPER CAPACITY; FOR WET OR DRY RUBBING, SANDING OR POLISHING
MRC	Decoded Requirement	Clear Text Reply
TEXT	General Characteristics Item Description	TYPE: RECIPROCATING; ABRASIVE CONTACT AREA: 70 SQ. IN. MINIMUM; DRIVE METHOD: PNEUMATIC; NO LOAD SPEED RATING: 3000 SPM MINIMUM; AIR CONSUMPTION: 18 CFM MAXIMUM AT NO LOAD; AIR PRESSURE: 75 PSIG MAXIMUM OPERATING