820-4551254-1 Part by Copes Vulcan Inc with NSN 5340-01-241-6491 - Request a Quote Now

Part Number: 820-4551254-1

Manufacturer: copes vulcan inc

NSN: 5340-01-241-6491

CAGE Code: 97370

NIIN: 012416491

Item Name : bracket double angle

INC Code: 20354

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number 820-4551254-1 from Copes Vulcan Inc (CAGE Code 97370), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 820-4551254-1 Details:

Part number 820-4551254-1 is manufactured by Copes Vulcan Inc and listed with the item name Bracket Double Angle. Classified under NSN 5340-01-241-6491, the NIIN of this item is 012416491, its INC is 20354, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 820-4551254-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 820-4551254-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 820-4551254-1 with NSN 5340-01-241-6491, 5340012416491

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-241-6491 Item PartTypeName: BRACKET,DOUBLE ANGLE	5340	012416491	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
820-4551254-1	6	2	5

Characteristics Data of NSN 5340-01-241-6491, 5340012416491

MRC	Criteria	Characteristic
ACHY	MOUNTING HOLE TYPE	PLAIN
ADLK	FIRST LEG LENGTH	0.812 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	1.500 INCHES NOMINAL
AFPW	REINFORCEMENT METHOD	TURNED EDGE
AHLF	SECOND LEG WIDTH	1.000 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.234 INCHES MINIMUM AND 0.238 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	1.060 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.062 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.062 INCHES NOMINAL
AHPZ	CENTER SECTION HEIGHT	0.744 INCHES NOMINAL
AHQB	CENTER SECTION THICKNESS	0.062 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	2.000 INCHES NOMINAL
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	1.500 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.500 INCHES NOMINAL
AJZU	FIRST LEG STYLE	SQUARE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
AKBU	SECOND LEG STYLE	CUT OUT
CRTL	CRITICALITY CODE JUSTIFICATION	ZZZY
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL
CWNX	SECOND LEG CUTOUT WIDTH	0.380 INCHES NOMINAL
FEAT	SPECIAL FEATURES	SPECIAL QUALITY CONTROL TESTING
MATT	MATERIAL	STEEL COMP 1009
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 1 ASSN STD 1ST TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	ADJACENT ANGLES
TEST	TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION