2M912BUX1 Part by Cox Flow Measurement Inc with NSN 6680-01-380-4797 - Request a Quote Now

Part Number: 2M912BUX1

Manufacturer: cox flow measurement inc

NSN: 6680-01-380-4797

CAGE Code: 0U3B5

NIIN: 013804797

Item Name : test set flow rate

INC Code: 19100

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments

For competitive procurement options on part number 2M912BUX1 from Cox Flow Measurement Inc (CAGE Code 0U3B5), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 2M912BUX1 Details:

Part number 2M912BUX1 is manufactured by Cox Flow Measurement Inc and listed with the item name Test Set Flow Rate. Classified under NSN 6680-01-380-4797, the NIIN of this item is 013804797, its INC is 19100, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2M912BUX1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 2M912BUX1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6680-01-380-4797, 6680013804797

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
ACYN	Ac Voltage Rating	120.0 VOLTS NOMINAL
AEAS	Major Components	LAP TOP COMPUTER W/MONITOR,COMPUTER PROGRAM, INTERFACE/AMPLIFIER, AND TURBINE METER MANIFOLD
FAAZ	Phase	SINGLE
AKVY	Accessory Controlling Agency	AEROSPACE GUIDANCE AND METEOROLOGG CENTER
ANPZ	Inclosure Feature	MULTIPLE ITEM W/HOUSING
AQXY	Test Type For Which Designed	FUEL FLOW CALIBRATION SYSTEM FOR A/M99T-2 CALIBRATION TRAILER
AQXZ	Operating Test Capability	FLOW RANGE OF 0.5/250 GPM, TEMPERATURE RANGE OF +40/140 DEGREES F., VISCOSITY RANGE 0.8/50 CENTISTROKES
ACZB	Frequency Rating	60.0 HERTZ NOMINAL
FEAT	Special Features	PART OF THE A/M99T-2 CALIBRATION TRAILER USED FOR ENGINE TEST CELL CALIBRATION AND REPAIR, MANIFOLD CONSISTS OF TW0 TURBINE FLOW TRANSMITTERS, ONE RATED AT 10/261 GPM THE OTHER AT 0.5/ 20 GPM, A 10K OHM TRANSMITTER TEMPERATURE, AND A SOLENOID VALVE TO DIFFERENTIATE FLOW TRANSMITTERS. ALSO INCLUDES 50 FT CABLE ASSY