FDI-BDCL-10 Part by Cox Flow Measurement Inc with NSN 6680-01-505-7733 - Request a Quote Now

Part Number: FDI-BDCL-10

Manufacturer: cox flow measurement inc

NSN: 6680-01-505-7733

CAGE Code: 0U3B5

NIIN: 015057733

Item Name : test set flow rate

INC Code: 19100

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments

For competitive procurement options on part number FDI-BDCL-10 from Cox Flow Measurement Inc (CAGE Code 0U3B5), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number FDI-BDCL-10 Details:

Part number FDI-BDCL-10 is manufactured by Cox Flow Measurement Inc and listed with the item name Test Set Flow Rate. Classified under NSN 6680-01-505-7733, the NIIN of this item is 015057733, its INC is 19100, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FDI-BDCL-10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part FDI-BDCL-10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6680-01-505-7733, 6680015057733

MRC	Criteria	Characteristic
ACYN	Ac Voltage Rating	120.0 VOLTS NOMINAL AND 208.0 VOLTS NOMINAL
MRC	Decoded Requirement	Clear Text Reply
FAAZ	Phase	SINGLE/THREE
ACZB	Frequency Rating	60.0 HERTZ NOMINAL
HGTH	Height	72.000 INCHES NOMINAL
AKWC	Electrical Power Source Relationship	OPERATING
ABGL	Width	48.000 INCHES NOMINAL
AQXY	Test Type For Which Designed	RATE OF FLOW
AQXZ	Operating Test Capability	THE MINIMUM OPERABLE FLOW RANGE OF THE PROPOSED CALIBRATI
ABRY	Length	72.000 INCHES NOMINAL