PD-LDEN-236E Part by Curlin Healthcare Products Inc with NSN 6635-01-372-3089 - Request a Quote Now

Part Number: PD-LDEN-236E

Manufacturer: curlin healthcare products inc

NSN: 6635-01-372-3089

CAGE Code: 54136

NIIN: 013723089

Item Name : gage thickness ultrasonic

INC Code: 77777

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6635 Physical Properties Testing And Inspection

For competitive procurement options on part number PD-LDEN-236E from Curlin Healthcare Products Inc (CAGE Code 54136), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PD-LDEN-236E Details:

Part number PD-LDEN-236E is manufactured by Curlin Healthcare Products Inc and listed with the item name Gage Thickness Ultrasonic. Classified under NSN 6635-01-372-3089, the NIIN of this item is 013723089, its INC is 77777, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6635 Physical Properties Testing And Inspection. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PD-LDEN-236E

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PD-LDEN-236E with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6635-01-372-3089, 6635013723089

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
TEXT	General Characteristics Item Description	C/O CASE WHICH ACCOMODATES GAGE,BATTERY CHARGER POWER CABLE,SPARE TRANSDUCER AND CABLES,STEEL AND ALUMINUMGAGE BLOCKS,SPARE FUSE,COUPLANT; DIGITAL DISPLAY OF THICKNESS MEASUREMENT;SCOPE; TILT-BAIL HANDLE; BATTERY; 100-250 V AC,SINGLE PHASE,50-60 HZ; BATTERY; 6 FT. DETACHABLE BATTERY CABLE; MEASUREMENT RANGE OF STEEL/ALUMINUM: LOW SCALE 0.0070 TO 0.1950 IN.; HIGH SCALE 0.050 TO 1.990 IN. (THICKNESS); STEEL AND ALUMINUM GAGE BLOCKS OF 0.007,0.010,0.020,0.100,0.200,0.500,1.000,L.500,AND 2.000 IN. THICKNESS WITH TOLERANCE OF 0.0005 IN. PROVIDED,STEEL BLOCKS ARE NICKEL PLATED,AL BLOCKS ARE ANODIZED