131209 Part by Curtiss Wright Controls Inc with NSN 3110-00-232-3245 - Request a Quote Now

Part Number: 131209

Manufacturer: curtiss wright controls inc

NSN: 3110-00-232-3245

CAGE Code: 0AHP5

NIIN: 002323245

Item Name : bearing ball rod end

INC Code: 00049

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number 131209 from Curtiss Wright Controls Inc (CAGE Code 0AHP5), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 131209 Details:

Part number 131209 is manufactured by Curtiss Wright Controls Inc and listed with the item name Bearing Ball Rod End. Classified under NSN 3110-00-232-3245, the NIIN of this item is 002323245, its INC is 00049, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 131209

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 131209 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 131209 with NSN 3110-00-232-3245, 3110002323245

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-232-3245 Item PartTypeName: BEARING,BALL,ROD END	3110	002323245	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
131209	6	2	5

Characteristics Data of NSN 3110-00-232-3245, 3110002323245

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
AAZE	SHANK DIAMETER	0.4280 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM
AAZF	SHANK STYLE	INTERNALLY THREADED W/HEXAGON END
ABHP	OVERALL LENGTH	1.7455 INCHES MINIMUM AND 1.7855 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM
AGGY	SHANK THREAD LENGTH	0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
AGXH	LENGTH FROM BORE CENTER TO SHANK END	1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
ASDB	WIDTH ACROSS FLATS	0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.312 INCHES
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE SEAL
MATT	MATERIAL	STEEL COMP 4130 OUTER RING
MATT	MATERIAL	STEEL COMP 4130 SHAFT
MATT	MATERIAL	STEEL COMP E52100 BALL
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
SFTT	SURFACE TREATMENT	CADMIUM OUTER RING
SFTT	SURFACE TREATMENT	CADMIUM SHAFT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHAFT
STYL	STYLE DESIGNATOR	DOUBLE ROW,STAGGERED,BALL
THSD	THREAD SERIES DESIGNATOR	UNJF